Print this Page
Fasson® 70# 100% Pure Cotton Wet Strength/Z2010B/1.2M Polyester
Spec# B5779
Facestock:
Fasson® 70# White 100% Cotton is a tree-free, uncoated, matte white paper, featuring a unique letter press textured finish. It has exceptional strength, and its heavier basis weight makes it ideal for embossing. Printable by flexo and offset methods; suitable for hot foil stamping. There may be slight variations in tone and appearance due to the nature of the raw material used. This is normal for natural products. The facestock has wet strength treatment to increase performance in wet applications.

Due to its high stiffness, it is not recommended for labeling on small diameters, neck labels in particular. It is important to apply adequate pressure during the labeling process to ensure a good adhesion performance on the substrate.

Fasson® 100% Cottom is a sustainable solution for your brand story.



Basis Weight:
70# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.00730 inches ± 10%


Tensile:
MD 12# per inch width
CD 8# per inch width


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® Z2010 is a versatile, general purpose permanent adhesive designed for excellent adhesion to glass, corrugated cardboard and plastics. Developed with excellent initial tack, permanent adhesion and cold/web application performance. Fasson® Z2010 performs without sacrificing high-speed converting or good diecutting and matrix stripping properties. Fasson® Z2010 adhesive is APEO-Free.

For premium packaging, Fasson® Z2010 offers confidence in cold/wet applications and is ideal for brands looking for ice bucket and cold box performance.

FDA compliance: Fasson® Z2010 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+0° F


Service Temperature Range:
-30° F to +300° F (Subject to Facesheet)
Typical Performance Data: Tested with 60# Estate #8 paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

3.5 lbs
2.4 lbs Tear

HDPE
Loop Tack:
Peel Adhesion:

2.5 lbs
1.5 lbs Tear

PET
Loop Tack:
Peel Adhesion:

5.0 lbs
1.5 lbs Tear

Glass
Loop Tack:
Peel Adhesion:

4.5 lbs
2.5 lbs Tear





Liner:
A 1.2 mil durable polyester liner suitable for high-speed, roll-to-roll diecutting, stripping, and label dispensing. Its ultra-smooth surface enhances adhesive wet-out.



Basis Weight:



Caliper:
0.00118 inches +/- 10%


Tensile:
MD 27,000 psi
CD 27,000 psi


Tear:
n/a
Total Construction Caliper (approximate): 0.00918 inches +/- 10%

NOTE: Z2010B is a heavy coat weight adhesive of Z2010.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511