DURABLE PORTFOLIO
Product Data Sheet
Fasson® 60# U.L. Litho FSC®/S730/40#SCK
Spec#: 10254 - Durable
FacestockFacestock physical properties
Fasson® 60# U.L. Litho FSC® is a coated litho paper. Good solvent/water-based flexo and screen printing. Fair UV flexo and letterpress printing. Not recommended for offset printing. Good converting characteristics.

The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® Chain of Custody Certification verifies that FSC® Certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0000
0.00
Tensile:
ASTM D882
MD
0
0
CD
0
0
AdhesiveAdhesive physical properties
S730 is a clear solvent acrylic permanent adhesive for general purpose industrial applications. Features good intial tack and ultimate adhesion to a wide variety of substrates including medium to low surface energy plastics, and high shear for minimal cold flow or ooze characteristics.
Imperial Value
Units
Metric Value
Units
Type:
Solvent Acrylic
Caliper:
ASTM D1000
0.0009
inches
22.86
micron
Standard Coat Wt:
27
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
59.2
oz/inch
65.1
N/100 mm
LinerLiner physical properties
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0240
inches
0.6100
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
41.0
lbs
0.0
g/sq m
Tensile:
ASTM D882
MD
20.0
lbs
0.0
CD
10.0
lbs
0.0
Tear:
TAPPI T414
MD
45.0
grams
0.0
CD
65.0
grams
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
50
N/A

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
UL969 recognized for "indoor DRY" File #MH8212
UL50e recognized for Enclosures for Electrical Equipment File MH26355
The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® Chain of Custody Certification verifies that FSC® Certified material is identified or kept segregated from non-certified or non-controlled material through this chain. NOTE: In-house testing is always recommended prior to final ink selection.

Applications and Uses


Printing and Converting
Good printing with water-based flexo, UV flexo, UV Inkjet (UVIJ), screen, and solvent ink systems. Not recommended for offset printing. This facestock can be imprinted. UVIJ platforms include; Domino N610i, Durst Tau® 330, EFI Jetrion® 4950LX and the Mark Andy Digital Series.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511