Print this Page
Fasson® 1Mil Clear Print Treated Polyester/R1350/1.2Mil Heat Seal Polyester
Spec#
79987
Facestock:
Fasson® 1 Mil Clear Print-Treated Polyester is a highly transparent film featuring excellent tear strength, heat resistance, dimensional stability and chemical resistance. Designed to enhance printability with solvent and water-based flexographic ink systems. Also provides enhanced UV letterpress printability. Suitable for thermal transfer printing applications with select ribbons. Specific testing required for printability. Complies with 21 Code of Federal Regulations (CFR) 177.1630 (F), (G) and (H) for direct food contact.
Basis Weight:
N/A
Caliper:
0.000906 inches ± 10%
Tensile:
MD 32,000 psi
CD 38,000 psi
Tear:
N/A
Stiffness:
N/A
Adhesive:
Fasson® R1350 is a specially formulated low-odor acrylic adhesive with a smooth, low-noise peel. Excellent water whitening resistance and ultra low peel strength combine to make this adhesive ideal for use in heat sealable reclosure applications such as leafy greens where there is a large amount of moisture present. The R1350 complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components into the food; or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Solvent Acrylic
Minimum Application Temperature:
+50° F
Service Temperature Range:
-40° F to + 250° F
Typical Performance Data:
2.0 mil Clear BOPP at room temperature on standard lab panels, unless otherwise noted.
Stainless Steel
Loop Tack:
Peel Adhesion:
0.4 lbs
0.3 lbs
PET Flow Wrap
Loop Tack:
Peel Adhesion:
0.5 lbs
0.4 lbs
Liner:
Fasson® Clear Polyester film liner, heat sealable on one side. The heat sealable layer is designed to heat seal onto itself or substrates such as APET, CPET, modified CPET and PET. Fitness for use testing required to ensure the heat seable layer adheres to the specific tray material used. The heat seal film exhibits a broad sealing temperature range of 260° F to 410° F. Complies with 21 Code of Federal Regulations (CFR) 177.1630 (F), (G) and (H) for direct food contact.
Heat Seal Strength: 855 grams/inch (Film/Film @ 248°F, 31PSI, 1 Second)
Basis Weight:
N/A
Caliper:
0.00118 inches ± 10%
Tensile:
MD 23,400 psi
CD 26,400 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.002886 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511