Print this Page
Fasson® Killer White
TM
NE4 FSC®/Z1010/1.2 Mil Polyester
Spec#
54106 - Restricted to Multi-Color Corporation
Facestock:
Fasson® Killer White™ NE FSC® is a white paper which features an uncoated, rich vellum, smooth finish and a wet strength additive, which increases resistance to tearing and shriveling in moist environments. Fasson® Killer White™ NE4 FSC®, enhanced with Fasson® Z1010 adhesive, offers an improved level of dry opacity over identical facestock material. Unlike similar facestocks which display a graying effect when exposed to water, Fasson® Killer White™ NE FSC® with Fasson® Z1010 adhesive offers an improvement in wet opacity, for clear brand differentiation.
This is a proprietary construction restricted to Multi-Color Corporation, produced specifically for wine labeling applications
Note: Qualification is a subjective evaluation, and customer perception might differ. As label designs vary, we encourage end application testing of all materials.
The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Basis Weight:
63.50# per ream ± 10%
(500 sheets 25" x 38")
Caliper:
0.0053 inches ± 10%
Tensile:
MD 35# per inch width
CD 22# per inch width
Tear:
MD 74 grams per sheet
CD 74 grams per sheet
Stiffness:
n/a
Adhesive:
Fasson® Z1010 is a patented adhesive developed for short-term (15 to 20 minute) label repositionability, brightness enhancement, and good cold temperature performance, without sacrificing diecutting and stripping properties. It is particularly well-suited for white and blush wines, champagne, and beer applications, due to its intended exposure to ice bucket conditions.
Fasson® Z1010 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Emulsion acrylic
Minimum Application Temperature:
20° F
Service Temperature Range:
-20° F to +200° F
Typical Performance Data:
Stainless steel
Loop Tack:
Peel Adhesion:
2.6 lb.
4.5 lb.
HDPE
Loop Tack:
Peel Adhesion:
1.8 lb.
3.6 lb
Glass
Loop Tack:
Peel Adhesion:
2.2 lb.
3.6 lb.
PET
Loop Tack:
Peel Adhesion:
1.7 lb.
4.7 lb.
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00116 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.0074 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511