Print this Page
FassonŽ 2M White BOPP TC/C4510/0.92M Polyester
Spec# TBD-Restricted to MCC 2M White BOPP TC/C4510
Facestock:
FassonŽ 2 Mil White BOPP TC is a heat set, biaxially-oriented, co-extruded polypropylene film, with good opacity and a bright white high gloss background. Avery Dennison's TC-2000 topcoat is suitable for printing by UV inkjet, UV letterpress and Flexographic UV, solvent and water-based inks. Not recommended for thermal transfer printing. This topcoated facestock has excellent moisture resistance, and good diecutting and dispensing characteristics. Use caution when applying inks out to the edge of the label, particularly UV cured inks and varnishes. High shrinkage coatings can cause labels to lift off the liner and/or substrate.



Basis Weight:
N/A


Caliper:
0.00191 inches +/- 10%


Tensile:
MD 18,500 psi
CD 35,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
FassonŽ C4510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass and corrugated cardboard. FassonŽ C4510 was engineered specifically for cold, damp environments typical of dairy environments. FassonŽ C4510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive may occur.

C4510 Hot Melt adhesive contains 40% Renewable Content.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+15° F (-9° C)


Service Temperature Range:
-65° F to + 160° F
Typical Performance Data: Tested using 50# Dairy Label facestock at room temperature on standard lab panels. *Indicates face tear.


HDPE
Loop Tack:
Peel Adhesion:

2.6-3.4 lbs
1.0-1.8 lbs

LDPE
Loop Tack:
Peel Adhesion:

2.5-3.3 lbs
1.2-1.8 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.9-1.5 lbs
0.5-1.1 lbs

PET
Loop Tack:
Peel Adhesion:

4.4-5.4 lbs
2.0-2.8 lbs

HDPE (32° F)
Loop Tack:
Peel Adhesion:

2.6-3.4* lbs
1.4-2.2* lbs
Liner:
A 0.92 mil clear polyester liner which is designed primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00090 inches +/- 10%


Tensile:
MD 32,000 psi
CD 35,000 psi


Tear:

Total Construction Caliper (approximate): 0.00361 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511