Print this Page
Fasson® Trans-Therm® 2C FSC®/TL2/40#SCK
Spec#
08486 - Restricted for hand-applied, butt-cut labels
Facestock:
Fasson® Trans-Therm® 2C FSC® is a bright white, ultra-smooth coated facestock offering high quality thermal transfer printing and a high degree of smudge resistance in slow- to high-speed printers. Ideal for high density barcode applications. This product is suitable for use in applications where excellent print quality and high quality bar code printing are critical. The coating is designed to allow for virtually mottle-free flexo pre-printing, for screens, reverses, and other areas of heavy ink coverage.
The FSC® certification ensures that products come from well managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Basis Weight:
50# per ream
(500 sheets 24"x36")
Caliper:
0.00350 inches +/- 10%
Tensile:
MD 28# per inch width
CD 19# per inch width
Tear:
MD 53 grams per sheet
CD 53 grams per sheet
Stiffness:
MD 120 mg
CD 85 mg
Adhesive:
Fasson® TL2 is a highly aggressive permanent adhesive. This adhesive also provides excellent performance on difficult-to-label substrates, such as wood and carpet backing. Not recommended for diecutting and stripping. Maximum recommended roll length is 2,500 feet due to adhesive ooze concerns.
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Hot Melt Rubber
Minimum Application Temperature:
+35° F
Service Temperature Range:
-65° F to +150° F
Typical Performance Data:
60# C2S Paper at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
7.0 lbs
3.9-4.6 lbs
Treated HDPE
Loop Tack:
Peel Adhesion:
5.0 lbs
3.3-3.7 lbs
Treated LDPE
Loop Tack:
Peel Adhesion:
5.8 lbs
3.4-4.1 lbs
Polypropylene
Loop Tack:
Peel Adhesion:
6.2 lbs
3.5-4.1 lbs
Recycled Corrugated
Loop Tack:
Peel Adhesion:
4.7 lbs; pulled fiber
2.3-2.8 lbs; pulled fiber
Liner:
40# SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness and tear resistance. Used primarily for roll-to-roll label applications.
Basis Weight:
41# per ream ±10%
(500 sheets 25" x 36")
Caliper:
0.0025 inches ±10%
Tensile:
MD 35# per inch width
CD 16# per inch width
Tear:
MD 35 grams
CD 45 grams
Total Construction Caliper
(approximate):
0.0077 inches ± 10%
Note: **
Buyer assumes all risk for possible edge-ooze.**
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511