Print this Page
Fasson® 1.2 Mil Clear BOPP NTC/S6509/.92g PET
Spec#
TBD S6509
Facestock:
Fasson® 1.2 Mil Clear BOPP NTC is a non-topcoated biaxially-oriented polypropylene film designed for specific semi-rigid applications, using solvent gravure printing. Clear NTC BOPP presents significant challenges for ink adhesion via UV printing technologies. Therefore, application-specific testing is recommended for suitability/durability across all ink and varnish combinations, as well as printing processes, including solvent gravure.
Printing & Converting: Printable with web screen, UV letterpress, and flexographic inks. Use caution when applying ink out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection. This product can be diecut and stripped on standard web-fed presses with either flatbed or rotary dies. For best performance, dies should be tooled specifically for this construction. This is a thin film product, and more care needs to be taken in both converting and dispensing.
Basis Weight:
n/a
Caliper:
0.0012 inches ± 10%
Tensile:
MD 19,900 psi target
CD 36,900 psi target
Tear:
n/a
Stiffness:
n/a
Adhesive:
Fasson® S6509 is a clear, permanent acrylic adhesive designed specifically for prime label applications which require resistance to water. It is engineered to perform on pasteurized applications up to +149° F, typical for pasteurized beer applications. Maintains clarity through exposure to extended exposure to ice water after the label has been applied to a dry surface. This adhesive has excellent wetout, converting, stripping, and dispensing characteristics.
Fasson® S6509 adhesive compositionally complies with FDA Title 21 Code of Federal Regulations (C.F.R.) Section 175.105 ("Adhesives") indirect food contact. Please note that if you do not have orientation equipment and apply labels over seams, the labels may whiten on the seam but will clear within 24 hours.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+36° F
Service Temperature Range:
-40° F to +176° F (upper service temperature is facestock limitation for 2 Mil Clear BOPP)
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
1.2 lb/in
1.9 lb/in
PET
Loop Tack:
Peel Adhesion:
2.5 lb/in
2.2 lb/in
Glass
Loop Tack:
Peel Adhesion:
2.1 lb/in
1.9 lb/in
Liner:
A 0.92 mil clear polyester liner which is primarily designed for roll-to-roll, high-speed dispensing applications.
Basis Weight:
32.7g/m2
Caliper:
0.00092 inches ± 10%
Tensile:
Tear:
Total Construction Caliper
(approximate):
0.00292 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511