Print this Page
Fasson® Crystal FasClear® TC/S2001/44#PK
Spec# 74652-OBSOLETE
Facestock:
Fasson® Crystal FasClear® is a topcoated, flexible crystal clear polyolefin film with exceptional dimensional stability. Recommended for printing with web UV screen, UV letterpress, UV Flexographic and water based flexographic inks. Not recommended for solvent based ink systems. In-house testing is always recommended prior to final ink selection. Use caution when applying inks to the edge of the label, particularly UV inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate.



Basis Weight:
N/A


Caliper:
0.0025 inches ± 10%


Tensile:
MD 21,000 psi
CD 3,200 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S2001 is a clear permanent adhesive designed for prime film labeling where exceptional optical clarity is required. Suited to clear squeezable and clear facestock applications, S2001 provides short-term repositionability, and good ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester Facestock at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.5 lbs
2.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
2.8 lbs

Flame Treated Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.3 lbs

Flame Treated HDPE
Loop Tack:
Peel Adhesion:

N/A
1.4 lbs

Glass
Loop Tack:
Peel Adhesion:

N/A
2.4 lbs
Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. NOTE: Liner color variation may occur.



Basis Weight:
43# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00320 inches +/- 10%


Tensile:
MD 28.5# per inch width
CD 16# per inch width


Tear:
n/a
Total Construction Caliper (approximate): .0065 inches ± 10%

Printing/Converting Guidelines:
Recommended for printing with web UV screen, UV letterpress, UV Flexographic and water based flexographic inks. Not recommended for solvent based ink systems. In-house testing is always recommended prior to final ink selection. Caution should be used when applying inks to the edge of the label, particularly UV inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. This product can be diecut and stripped at high speeds on standard web-fed presses with either flatbed or rotary dies. For best performance, it is recommended that dies be tooled specifically for this construction.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511