Print this Page

þ - Mandatory fields
Fasson® DL50 is a permanent adhesive designed for adhesion to HDPE milk jugs and similar surfaces. DL50 adhesive meets the requirements of FDA 175.105 for indirect food contact.
Adhesive # DL50 - Do not publish


Type: Hot melt rubber

Substrate
Loop Tack
Peel Adhesion
HDPE3.9 lbs2.1 lbs
Corrugated1.6 lbs1.7 lbs
LDPE3.3 lbs2.2 lbs
Minimum Application Temperature:+25° F; -4° C

Service Temperature Range: -65° F to +160° F

Face:
Tested with 55# Dairy Label at room temperature on standard lab panels.

FDA Compliance:
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Typical Shear:
Coat Weight:







Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

Print this Page



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511