Print this Page
Fasson® 70# 100% Pure Cotton Wet Strength/S100RB/1.2M Polyester
Spec# 54477
Facestock:
Fasson® 70# White 100% Cotton is a tree-free, uncoated, matte white paper, featuring a unique letter press textured finish. It has exceptional strength, and its heavier basis weight makes it ideal for embossing. Printable by flexo and offset methods; suitable for hot foil stamping. There may be slight variations in tone and appearance due to the nature of the raw material used. This is normal for natural products. The facestock has wet strength treatment to increase performance in wet applications.

Due to its high stiffness, it is not recommended for labeling on small diameters, neck labels in particular. It is important to apply adequate pressure during the labeling process to ensure a good adhesion performance on the substrate.

Fasson® 100% Cottom is a sustainable solution for your brand story.



Basis Weight:
70# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.00730 inches ± 10%


Tensile:
MD 12# per inch width
CD 8# per inch width


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S100R is a permanent adhesive which is removable in minimum 100° F water. Developed with good initial tack and ultimate adhesion, S100R can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100° F. Removal times will vary due to differences in facestocks and substrates. It might be as short as 30 seconds from HDPE, or as long as 5 minutes. Where removal is required, this adhesive is recommended for use on HDPE, polypropylene, poly vinyl chloride (PVC), polyester, Lexan®, stainless steel, and glass. We do not recommend it for use with film facestocks (i.e., polypropylene, polystyrene), due to a potential surface interaction which could cause the loss of water removability. This adhesive exhibits excellent diecutting and stripping properties.

FDA Compliance:  Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105).  Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

Lexan® is a registered trademark of General Electric Company.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+20° F


Service Temperature Range:
-65° F to 200° F
Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.6 lbs
1.8 lbs - Tear

HDPE
Loop Tack:
Peel Adhesion:

1.6 lbs
1.1 - 1.6 lbs

PET
Loop Tack:
Peel Adhesion:

2.6 lbs
1.2 lbs -Tear

Glass
Loop Tack:
Peel Adhesion:

2.7 lbs
1.9 lbs -Tear





Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00946 inches ± 10%

Applications and Use: This product is designed for wine labeling and is suitable for primary labeling of premium goods such as spirits, specialist foods.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511