Print this Page
Fasson® 2 Mil Clear BOPP TC/R143/1.5M PET
Spec# 73487-REV 10/2020F
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity.  The surface has been modified for improved ink adhesion.  This product has excellent moisture resistance and good diecutting and dispensing characteristics.  Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons.  Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes.  High shrinkage coatings can cause labels to lift off the liner or substrate.  In-house testing is always recommended prior to final ink or ribbon selection.



Basis Weight:



Caliper:
0.0020 inches +/- 10%


Tensile:
MD 29,700 psi
CD 25,400 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® R143 is a specially formulated acrylic removable adhesive with versatile performance properties. FDA Compliance:  Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105).  Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Solvent acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +250° F
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

N/A
1.8 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
N/A

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
N/A

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
N/A

HDPE
Loop Tack:
Peel Adhesion:

N/A
N/A
Liner:
A 1.5 mil hazy clear, durable polyester liner suitable for high speed die cutting and stripping applications. Used primarily for roll-to-roll, high speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.0015 inches ± 10%


Tensile:
MD 23,000 PSI
CD 23,000 PSI


Tear:
N/A
Total Construction Caliper (approximate): 0.0043 inches ± 10%

Printing/Converting
Printable by web screen, UV letterpress and flexographic. Caution should be exercised when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.

This product can be die-cut and stripped at high speeds on standard web-fed presses with either flat bed or rotary dies. For best performance it is recommended to have dies tooled specifically for this construction. This product offers excellent dispensing characteristics.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511