Print this Page
Fasson® 3.5 Mil Matte White BOPP WBIJ PB/AT20N/1.5 Mil PET/AT20N/50# SCK
Spec# TBD - TLP
Facestock:

Fasson® Matte White BOPP WBIJ is a white 3.5 mil biaxially-oriented polypropylene film featuring a matte finish.  It is designed for use in water-based, dye or pigment-based inkjet printers, and provides an instant dry surface which captures brilliant colors and high resolution images, text, lines, and barcodes.  The surface accepts flexo spot colors and varnishes after digital printing.  It is ideal for applications which print variable information, in conjunction with full color graphics.   NOTE: In-house testing is always recommended prior to final ink selection. Qualification is subjective evaluation and customer perception may differ. As label designs vary, we encourage end application testing of all materials.

Fasson® and all other Avery Dennison brands, product names and codes are trademarks of the Avery Dennison Corporation. All other brands and product names are trademarks of their respective owners. All statements, technical information and/or recommendations in this document are based on tests believed to be reliable but do not constitute a guarantee or warranty by Avery Dennison.



Basis Weight:
N/A


Caliper:
0.0035 inches ± 10%


Tensile:
MD 7,395 psi
CD 14,790 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® AT20N is an all-temperature permanent adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Acrylic Emulsion


Minimum Application Temperature:
-20°F or -29°C


Service Temperature Range:
-65°F to +200°F
Typical Performance Data: , Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

2.0-2.8
1.5-2.7

NonTreated HDPE
Loop Tack:
Peel Adhesion:

1.4-2.2
0.6-1.4

PP
Loop Tack:
Peel Adhesion:

1.8-2.6
1.0-1.8

Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.8-1.5
0.8-1.6

Glass
Loop Tack:
Peel Adhesion:

2.0-2.8
0.7-1.5
Liner:
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications



Basis Weight:
N/A


Caliper:
0.00142 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Adhesive:
Fasson® AT20N is an all-temperature permanent adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Acrylic Emulsion


Minimum Application Temperature:
-20°F or -29°C


Service Temperature Range:
-65°F to +200°F
Typical Performance Data: , Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

2.0-2.8
1.5-2.7

NonTreated HDPE
Loop Tack:
Peel Adhesion:

1.4-2.2
0.6-1.4

PP
Loop Tack:
Peel Adhesion:

1.8-2.6
1.0-1.8

Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.8-1.5
0.8-1.6

Glass
Loop Tack:
Peel Adhesion:

2.0-2.8
0.7-1.5
Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
55# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 52# per inch width
CD 24# per inch width


Tear:
MD 46grams
CD 56 grams
Total Construction Caliper (approximate): 0.0098 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511