Print this Page
Fasson® DT 300LD FSC®/C2500/40#CEK
Spec# 19598
Facestock:
Fasson® Direct-Therm 300LD FSC® is a smooth, non-topcoated bright white paper with a high sensitivity thermal coating. It is intended for use in dry applications. Exposure to contaminants such as water, oil, alcohol and other liquids can affect the thermal layer. This product is suitable for use in a wide variety of direct thermal label printers, especially those typically used in industrial applications.

Fasson recommends material to be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product.

The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
50.0# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.00311 inches ± 10%


Tensile:
MD 34# per inch width
CD 14# per inch width


Tear:
MD 50 grams per sheet
CD 50 grams per sheet


Stiffness:
MD 90 mg
CD 50 mg
Adhesive:
Fasson® C2500 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, treated glass, and corrugated cardboard. The 35° F minimum application temperature covers the vast majority of prime label requirements. Fasson® C2500 features excellent high speed/wide web converting characteristics. Fasson® C2500 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+35° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: Using 60# Semi-Gloss Elite™ facestock, at room temperature.


HDPE
Loop Tack:
Peel Adhesion:

4.71 lbs
3.72 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

4.60 lbs
2.62 lbs

Glass - PE treated
Loop Tack:
Peel Adhesion:

2.34 lbs
2.34 lbs

Shrink film
Loop Tack:
Peel Adhesion:

2.88 lbs
2.31 lbs

Recycled corrugated
Loop Tack:
Peel Adhesion:

1.57 lbs
1.81 lbs
Liner:
40# Calendered Environmental Kraft is an unbleached, supercalendered kraft paper featuring high internal strength, toughness, and tear resistance. Excellent for diecutting and stripping; used primarily for roll applications.



Basis Weight:
40# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0025 inches ±10%


Tensile:
MD 44# per inch width
CD 21# per inch width


Tear:
MD 34 grams
CD 38 grams
Total Construction Caliper (approximate): 0.0066 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511