Print this Page
Fasson® DT 300IR FSC®/AT20/40#SCK
Spec# 14340 REV 10/2020F OBSOLETE 11/2022
Facestock:
Fasson® Direct-Therm 300IR FSC® is a smooth white facestock with a heat sensitive, infrared scannable topcoating, capable of being scanned with infrared light source, up to 900nm. Excellent resistance to direct water exposure and superior resistance to heat and humidity. Prints well with water-based flexo inks. 

The FSC® certification ensures that these products come from well managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified as FSC® certified, or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
54# per ream +/- 10%
(500 sheets 25"x38")


Caliper:
0.00315 inches +/- 10%


Tensile:
MD 32# per inch width
CD 16# per inch width


Tear:
MD 43 grams
CD 44 grams


Stiffness:
MD 90 mg
CD 45 mg
Adhesive:
Fasson® AT20 is an all-temperature permanent adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20 is an ideal adhesive for warehouse applications. Fasson® AT20 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion acrylic


Minimum Application Temperature:
-20° F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

2.7 lbs
2.2-3.0 lbs

Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
1.1-2.1 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

2.9 lbs
1.8-2.4 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.6 lbs
1.1-2.1 lbs; pulled fiber

Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
1.1-2.0 lbs
Liner:
Fasson® 40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.



Basis Weight:
41.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.00245 inches ±10%


Tensile:
MD 41# per inch width
CD 17# per inch width


Tear:
MD 37 grams
CD 45 grams
Total Construction Caliper (approximate): 0.00655 inches ± 10%

Applications and Uses
Fasson® DT 300IR is specially designed for infrared scannable applications and offers the following physcial performance characteristics:
Initial Static Activation Temp. 150°F
Optimum Activation Temp. 175°F
Print Density at 100°C./ 212°F 1.40 ODU
Resistance to 24 hr Water Immersion- Excellent
Resistance to Blood, Fats, Oils, PVC- Excellent
Resistance to Alcohol Solvents & Vinegar- Excellent.

Fasson highly recommends material to be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511