DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil Clear Polyester TCRC/S8015LW/50#MF
Spec#: 78947 - Obsolete
FacestockFacestock physical properties
Silicone Coated 2M CL PET TC
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0020
inches
50.80
micron
Tensile:
ASTM D882
MD
31,200
PSI
2,193
kg/cm2
CD
36,900
PSI
2,594
kg/cm2
AdhesiveAdhesive physical properties
S8015LW adhesive is a high strength opaque white adhesive featuring medium initial tack, adhesion and shear. Offers a permanent bond to a wide variety of substrates.
Imperial Value
Units
Metric Value
Units
Type:
Acrylic
Caliper:
ASTM D1000
0.0011
inches
0.03
mm
Standard Coat Wt:
32
g/sq m
Minimum Appl Temp:
45
F
7
C
Service Temp Range:
Min
-20
F
-29
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
16.5
oz/inch
18.2
N/100 mm
LinerLiner physical properties
50# Machine finish liner with medium release characteristics
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0034
inches
0.0864
mm
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
51.5
lb/ream
82.4
g/sq m
Tensile:
ASTM D882
MD
29.0
lb.inch
130.5
N/25 mm
CD
19.0
lb.inch
85.5
N/25 mm
Tear:
TAPPI T414
MD
1.9
oz
54.0
grams
CD
1.9
oz
54.0
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
300 inches/min.
25
6.3 mils (0.0063 in)

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
Nameplates
Safety labels
Outdoor labels

Printing and Converting
Printable with most flexographic inks, including solvent, water-based, and UV-cured inks. Has been die cut, stripped, and printed at high press speeds, and auto dispensed at moderate speeds.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.
Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Stainless Steel

2. Aluminum

3. Polypropylene

4. ABS Plastic
47

42

26

48
51

46

29

53
55

48

43

59
61

53

48

65
68

52

49

41
75

58

54

45
80

69

38

36
88

76

42

39
Environmental Performance: Chemical Resistance test results
The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and evaluated immediately upon removal. Adhesion measured at 180° peel.
Adhesion to Stainless Steel
Visual
Edge
Chemical
oz/in
N/100mm
Appearance
Penetration mm
1. 70% IPA

2. Tide® Detergent

3. Engine Oil (10W30)

4. Water

5. Ammonia - pH 11

6. 409® Cleaner

7. Brake Fluid
57

47

53

37

47

41

37
63

52

58

41

51

45

41
No Change

No Change

No Change

No Change

No Change

No Change

No Change
0

0

0

0

0

0

0

Compliance Recognition: UL, C-U
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Acrylic Paint

    2. Acrylic PCP*

    3. Alkyd Enamel Paint

    4. Aluminum

    5. Epoxy PCP*

    6. Galvanized Steel

    7. Poly (Urethane) PCP*

    8. Stainless Steel

    9. Unsat Thermoset Polyester

    10. Phenolic

    11. ABS Plastic

    12. Nylon (polyamide)

    13. Polyphenolene Oxide

    14. Polyethylene

    15. Polypropylene

    16. Polystyrene

    17. PVC (Rigid)
-9

-9

-9

-9

-9

-9

-9

-9

-9

-9

-9

-9

-9





-9


-23

-23

-23

-23

-23

-23

-23

-23

-23

-23

-23

-23

-23





-23


302

302

302

302

302

302

302

302

302

212

176

176

176

104

104

104

104
150

150

150

150

150

150

150

150

150

100

80

80

80

40

40

40

40
I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I

I

I/O

I
Recognized Ribbons:



Tested by Underwriters Laboratories, Inc.
to meet the requirements of the Canadian Standards Association for labeling materials
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Metals

    2. Electrostatic Paints

    3. Plastics Group I

    4. Plastics Group II

    5. Plastics Group III

    6. Plastics Group V

    7. Plastics Group VI

    8. Plastics Group VII
-40

-40

-40

-40

-40

-40

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40
302

302

212

176

176

176

176

176
150

150

100

80

80

80

80

80
I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O
Recognized Ribbons:


409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511