Print this Page
Fasson® 2 Mil Clear BOPP TC/R3100/40#SCK
Spec#
77669-REV 10/2020F
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink or ribbon selection.
Basis Weight:
Caliper:
0.0020 inches +/- 10%
Tensile:
MD 29,700 psi
CD 25,400 psi
Tear:
n/a
Stiffness:
n/a
Adhesive:
Fasson® R3100 is a clear, ultra removable adhesive featuring excellent weatherability and UV resistance. Removes cleanly from a wide variety of substrates without staining or ghosting.
Type:
Solvent Acrylic
Minimum Application Temperature:
+50° F
Service Temperature Range:
-40° F to +200° F
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
0.5 lbs
0.2 lbs
Glass
Loop Tack:
Peel Adhesion:
0.3 lbs
PVC
Loop Tack:
Peel Adhesion:
0.2 lbs
Aluminum
Loop Tack:
Peel Adhesion:
0.1 lbs
HDPE
Loop Tack:
Peel Adhesion:
0.3 lbs
Liner:
40# SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness and tear resistance. Used primarily for roll-to-roll label applications
Basis Weight:
41# per ream ±10%
(500 sheets 25" X 36")
Caliper:
0.0024 inches ±10%
Tensile:
MD 42# per inch width
CD 16# per inch width
Tear:
MD 39 grams
CD 54 grams
Total Construction Caliper
(approximate):
0.0052 inches ±10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511