Print this Page
Fasson® 60# Semi-Gloss EliteTM/SR3020/1.2M Polyester
Spec# B7609
Facestock:
Fasson® 58# Semi-Gloss is a bright, blue-white C1S, super calendered paper. It is designed to bridge the gap between low-end and high-end process printing, up to 175 line screen. This sheet prints well with water-based flexo, UV flexo, and UV letterpress inks. It has improved smoothness, while maintaining strength for good converting and dispensing.



Basis Weight:
58# per ream +/- 10%
500 sheets 25" x 38"


Caliper:
0.00300 inches +/- 10%


Tensile:
MD 34.6# per inch width
CD 16# per inch width


Tear:
MD 43 grams per sheet
CD 56 grams per sheet


Stiffness:
MD 128 mg
CD 71 mg
Adhesive:
Fasson® SR3020 or CleanFlake Adhesive Technology is a clear, permanent acrylic adhesive, designed to enable PET bottle and thermoform container recycling per the Association of Plastic Recyclers (APR) Design Guide for Plastics Recyclability*.

FDA compliance: Fasson® SR3020 or CleanFlake Adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

*NOTE: Because PET bottles and containers can vary with respect to ease of recyclability, specific application testing to assure performance is highly recommended.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+20° F -7° C


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Tested with 60#C1S Paper at room temperature on standard lab panels.


PET
Loop Tack:
Peel Adhesion:

2.7 lbs.
1.5 lbs.




















Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00496 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511