Print this Page
Fasson® 2 Mil Clear BOPP TC/S7400/.92 Mil Polyester
Spec#
78654 - Spear only
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.
Basis Weight:
n/a
Caliper:
50 microns ± 10%
Tensile:
MD 20,580 psi
CD 39,750 psi
Tear:
n/a
Stiffness:
n/a
Adhesive:
Fasson® S7400 is a clear, permanent acrylic adhesive designed specifically for prime film beer and beverage label applications which require resistance to water. It is engineered to be applied in moist environments typically found in brewery (beer) applications. Maintains clarity even with extended exposure to ice water after the label has been applied to a dry surface. This adhesive offers improved release for both matrix stripping and dispensing. It also has excellent wetout characteristics. Not recommended for textured and/or low surface energy (HDPE) surfaces.
Fasson® S7400 adhesive compositionally complies with FDA Title 21 Code of Federal Regulations (C.F.R.) Section 175.105 ("Adhesives") indirect food contact.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+25° F
Service Temperature Range:
-40° F to +176° F (upper service temperature is facestock limitation for Clear BOPP)
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
1.8 lb/in
2.5 lb/in
PET
Loop Tack:
Peel Adhesion:
3.0 lb/in
1.5 lb/in
Glass
Loop Tack:
Peel Adhesion:
1.4 lb/in
1.2 lb/in
Liner:
A 0.92 mil clear polyester liner which is designed primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00092 inches ± 10%
Tensile:
MD 36,000 psi
CD 36,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00372 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511