Print this Page
Fasson® Direct Thermal Eco FSC®/S1550/1.7 Mil SCK 
Spec# B2884-REV 2/2024L
Facestock:
Fasson® Direct Thermal-Eco FSC® is a thin, lightweight economy direct thermal printable facestock which provides good barcode printing within a variety of common DT grocery and logistics applications.

The FSC® certification ensures that products come from well managed forests that provide environmental, social and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
32#per ream +/- 10%
(500sheets 25"X38")


Caliper:
0.00205 inches +/- 10%


Tensile:
MD 20# per inch width
CD 10# per inch width


Tear:
MD 22 grams per sheet
CD 25 grams per sheet


Stiffness:
MD 22 mg
CD 13 mg
Adhesive:
Fasson® S1550 is a versatile general purpose permanent adhesive designed for good adhesion to corrugated cardboard and superior adhesion to plastics. It offers good initial tack and ultimate adhesion, especially at lower temperatures, without sacrificing high-speed converting. The S1550 meets the requirements of FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+30° F (-1° C)


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: 60# C1S Paper







Corrugated
Loop Tack:
Peel Adhesion:

0.5
0.7


PVC
Loop Tack:
Peel Adhesion:

3.0
2.0

Glass
Loop Tack:
Peel Adhesion:

2.7
3.1

Rigid HDPE
Loop Tack:
Peel Adhesion:

1.7
1.0
Liner:
Fasson® 1.7M Paper SCK is a semi-bleached, super-calendered kraft paper featuring high internal strength, toughness and tear resistance. Excellent for diecutting and stripping. Used primarily for roll to-roll applications.



Basis Weight:
32# per ream ± 10%
(500 sheets 24"x 36")


Caliper:
0.0017 inches ± 10%


Tensile:
MD 33# per inch width
CD 13.5# per inch width


Tear:
MD 30.5 grams
CD 37.0 grams
Total Construction Caliper (approximate): 0.00455 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511