Print this Page
Fasson® Direct-Therm 300HD LL/S2045
Spec# 54278
Facestock:
Fasson® Direct-Therm 300HD LL is a smooth white paper with a high sensitivity thermal coating. This product is suitable for use in a variety of direct thermal label printers, enabled for linerless media. It offers a robust topcoat to perform well in high durability and general purpose applications. This includes service counter and deli applications, with resistance to moisture, heat, PVC and other common contaminants. This product is also well suited for parcel delivery and logistics, where moderate resistance to moisture, stretch wrap and abrasion is required.

Fasson recommends material to be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product



Basis Weight:
50# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 30# per inch width
CD 14# per inch width


Tear:
MD 45 grams per sheet
CD 55 grams per sheet


Stiffness:
MD 90mg
CD 45 mg
Adhesive:
Fasson® S2045 is a rubber-based hot melt permanent adhesive characterized by initial tack and excellent adhesion performance on a wide variety of substrates including corrugated cardboard. S2045 is an excellent adhesive for warehouse and other applications.



Type:
Hot Melt Rubber-Based


Minimum Application Temperature:
32°F, 0°C


Service Temperature Range:
-40°F to +140°F
Typical Performance Data: Tested with DT300HD LL at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

5.10 lbs
3.97 lbs

HDPE
Loop Tack:
Peel Adhesion:

2.76 lbs
3.16 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

3.42 lbs
3.70 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.33 lbs
1.38 lbs

Glass
Loop Tack:
Peel Adhesion:

5.76 lbs
4.09 lbs
Liner:
N/A (Linerless)



Basis Weight:



Caliper:



Tensile:



Tear:

Total Construction Caliper (approximate): 0.0038 inches ± 10%

Applications and Uses: This product is suitable for use in a variety of direct thermal label printers that are enabled for linerless media. Fasson ® Direct-Therm 300HD LL is resistant to a range of contaminants, and has good environmental image and background stability. Print density is 100^C/212^F is 1.25 ODU. DT300HD LL is a solution for most common DT linerless applications. Fasson highly recommends material to be imaged and used within six to twelve months (FIFO inventory method) upon receipt of the material for the finest quality product.


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511