Print this Page
Fasson® Direct-Therm 300LD/AT20N/1.7M BG
Spec# TBD
Facestock:
Fasson® Direct-Therm 300LD is a smooth, non-topcoated bright white paper with a high sensitivity thermal coating. It is intended for use in dry applications. Exposure to contaminants such as water, oils, alcohol, and other liquids can affect the thermal layer. This product is suitable for use in a wide variety of direct thermal label printers, especially those typically used in industrial applications.

Fasson recommends material to be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product.



Basis Weight:
50.7# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0033 inches ± 10%


Tensile:
MD 34# per inch width
CD 14# per inch width


Tear:
MD 48 grams per sheet
CD 53 grams per sheet


Stiffness:
MD 100 mg
CD 48 mg
Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold- temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-20° F -29° C


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

2.7 lbs
1.6-3.1 lbs

HDPE (Non-Treated)
Loop Tack:
Peel Adhesion:

1.9 lbs
0.8-1.0 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

2.2 lbs
1.4-2.1 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.8 lbs
1.0-1.4 lbs

Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
1.1-2.0 lbs
Liner:
Fasson® 1.7 Mil BG is a Bleached Glassine liner with excellent converting properties. The thinner BG liner offers greater productivity benefits to provide more labels on a same-size roll, reducing the number of change outs needed for the end user, and offering sustainability benefits related to reduced waste.



Basis Weight:
27.6# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0016929 inches ±10%


Tensile:
MD 5.0 KN/M
CD 1.8 KN/M


Tear:
MD 240 MN
CD 270 MN
Total Construction Caliper (approximate): 0.005693 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511