Print this Page
Fasson® 3Mil Synthetic Paper/S4600/1.2M Polyester
Spec# 78427
Facestock:
Fasson® 3 Mil Matte White Synthetic Paper is a matte-finished, opaque white polypropylene synthetic material with the look and feel of paper and the moisture-resistance of film. Suitable for flexographic, letterpress, screen, and thermal transfer printing. Ideal for appliance warning stickers, medical devices, wristbands, luggage tagging, and outdoor applications. Synthetic papers offer grease resistance, tear resistance, UV resistance (anti-yellowing), water resistance, layflat, and high-quality printing.

NOTE: In-house testing is always recommended prior to final ink selection. Qualification is subjective, and evaluation and customer perception might differ. Since label designs vary, we encourage end-use application testing of all materials.



Basis Weight:
n/a


Caliper:
0.0030 inches ± 10%


Tensile:
MD 15000 psi
CD 21000 psi


Tear:
n/a


Stiffness:
MD 103 mg
CD 122 mg
Adhesive:
Fasson® S4600 is a clear general purpose permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to + 300° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.77 lbs
4.1 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
4.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
4.3 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
4.6 lbs
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00496 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511