Print this Page
Fasson® Battery Label Olefin/I406KB/50#SCK ABC
Spec# 73031 - Restricted to hand-applied labels
Facestock:
Fasson® Battery Label Olefin is a 4 mil white polyolefin film which offers exceptional thermal transfer imaging and rotary press processing.



Basis Weight:
N/A


Caliper:
0.0040 inches ± 10%


Tensile:
MD 250,000 psi
CD 90,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® I406K is a clear, aggressive rubber based permanent adhesive with high initial tack and ultimate adhesion to a wide variety of substrates. Fair chemical and UV resistance.



Type:
Solvent Rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-40° F to +200° F
Typical Performance Data: Tested with 2 Mil Clear Polyester at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

9.2 lbs
5.9 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
6.1 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
6.1 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.2 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
4.4 lbs
Liner:
50#SCK is a bleached, super-calendered kraft paper stock with very good die cutting and matrix stripping properties. Used primarily for roll-to-roll and fanfold label applications. Not recommended for sheeted applications. Supplied with ABC ("anti-block coating") on the backside of the liner. The ABC coating provides a robust backside liner printability with water-based flexographic inks and resistance to backside label transfer.



Basis Weight:
57.70# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00320 inches +/- 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0082 inches ± 10%

Note: "I406KB" is a heavy adhesive coatweight.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511