DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2.1 Mil PP Tire TC White/TS8000 SGP/50#MF (special gum pattern)
Spec#: 79452
FacestockFacestock physical properties
2.1 Mil biaxially-oriented glossy white polypropylene film with a print-receptive topcoating.  This facestock can be printed by thermal transfer, letterpress, flexo, gravure, and screenprint methods, with good results using solvent, U.V., and water-based inks.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0021
inches
0.00
mils
Tensile:
ASTM D882
MD
25,400
psi
25
kpsi
CD
24,500
psi
25
kpsi
AdhesiveAdhesive physical properties
TS8000 is an extremely aggressive, permanent rubber-based adhesive specifically designed for use on rough and difficult-to-label surfaces, such as tires. Provided with a pattern gum at the edges to avoid adhesive bleed. Due to the heavy adhesive coatweight, TS8000 does not allow for high press speeds. Diecutting and press/inspection rewind tension should be kept under careful control to avoid adhesive bleed.
Imperial Value
Units
Metric Value
Units
Type:
TS-8000
Caliper:
ASTM D1000
Standard Coat Wt:
65
g/sq m
Minimum Appl Temp:
32
F
0
C
Service Temp Range:
Min
-4
F
-20
C
Max
158
F
70
C
Loop Tack Stainless
Steel: PSTC11
6.4
lbs
LinerLiner physical properties
50#MF is a coated stock which adds to the overall stability of the total construction, and helps when applying large hand applied labels
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0034
inches
0.0000
mils
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
47.5
lbs
0.0
g/sq m
Tensile:
ASTM D882
MD
30.0
lb/in
CD
15.0
lb/in
Tear:
TAPPI T414
MD
50.0
grms
CD
39.0
grms
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
100
.008

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
This product is specially designed to meet the performance requirements of automotive tire labeling.  With a high barrier to penetration of components within the rubber substrates, the product will remain free of staining pattern from the tire tread under the majority of normal storage conditions.

Applications and Uses
Label durability during periods of storage outdoor and in sunlight is good.

Printing and Converting
Due to the semi-rigid nature of this facestock, care should be taken when designing the die configuration.  Square corners should be designed out so as to avoid matrix breakage.  Web temperatures should be below 120° F at the point of stripping.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511