Print this Page
Fasson® Smudgeproof Pli-A-Print®/AT1B/50#SCK
Spec# 96549
Facestock:
Fasson® Smudgeproof Pli-A-Print® is a latex-impregnated paper with a smudge-resistant coating for computer imprinting. Fair printing with solvent and water based flexo, letterpress, screen and offset methods. Not recommended for UV flexo or UV varnishes.



Basis Weight:
60.5# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0037 inches ±10%


Tensile:
MD 24# per inch width
CD 20# per inch width


Tear:
MD 50 grams per sheet
CD 55 grams per sheet


Stiffness:
MD 85 mg
CD 45 mg

Adhesive:
Fasson® AT1 adhesive features good diecutting and stripping characteristics. Permanent at cold and room temperatures after 24 hours. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-10° F


Service Temperature Range:
-65° F to +250° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

1.5 lbs
1.5-2.1 lbs


Treated HDPE
Loop Tack:
Peel Adhesion:

1.1 lbs
1.2-1.6 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

2.0 lbs
1.4-1.6 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.0 lbs
0.5-0.8 lbs


Glass
Loop Tack:
Peel Adhesion:

1.7 lbs
1.5-2.4 lbs

Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
56.5# per ream ±10%
(24" X 36" 500 sheets)


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51# per inch width
CD 23# per inch width


Tear:
MD 56 grams per sheet
CD 71 grams per sheet

Total Construction Caliper (approximate): 0.0077 inches ± 10%

NOTE: AT1B is a heavy adhesive coatweight.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511