Print this Page
Fasson® Spunbond Reinforced 8 Pt. Tag/S246/1.5 Mil Polyester
Spec# 74943 - Restricted to Arcade
Facestock:
Fasson® 100# Tag is a white, coated 8pt. tag stock suitable for applications requiring a stiff facestock with high internal strength. Prints well using screen, offset and solvent/water based flexo, fair printability using UV ink systems, not recommended for imprinting.



Basis Weight:
121# per ream ±10%
(500 sheets 25"x38")


Caliper:
0.0080 inches ±10%


Tensile:
MD 60# per inch width
CD 35# per inch width


Tear:
MD 145 grams per sheet
CD 145 grams per sheet


Stiffness:
MD 1200 mg
CD 1000 mg
Adhesive:
Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot melt rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 60# C1S paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

6.2 lbs
3.0 lbs-tear

HDPE
Loop Tack:
Peel Adhesion:

4.3 lbs
2.2 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

4.5 lbs
3.0 lbs-tear

Glass
Loop Tack:
Peel Adhesion:

6.0 lbs
2.6 lbs-tear





Liner:
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.0015 inches ±10%


Tensile:
MD 32,000 PSI


Tear:
N/A
Total Construction Caliper (approximate): .0293 inches ± 10%

Reinforcement:
19 mil Spunbond PP is a 100% nonwoven spunbond polypropylene
Basis wt - 56.7 gsy
Tensile - MD 19,000 gm
- CD 15,000 gm
Elongation - MD 135%
- CD 161%
Thickness - 19 mils

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511