Print this Page

þ - Mandatory fields
Fasson® S692N-ER is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability.

Fasson® S692N-ER utilizes AD CleanFlake™ Technology to enable recycling for PET and HDPE plastic bottles and containers. It has been recognized by the Association of Plastic Recyclers.

Below is a link to the APR Letter Recognizing this construction with PET & HDPE recyling:
https://plasticsrecycling.org/images/Design-Guidance-Tests/APR-RES-LBL-1-ps-label-resource.pdf

FDA compliance: Fasson® S692N-ER adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.
Adhesive # S692N-ER HDPE&PET w/APR LINK DO NOT USE


Type: Emulsion Acrylic

Substrate
Loop Tack
Peel Adhesion
HDPETarget 1.8 lbsTarget 1.3 lbs
PETTarget 3.5 lbsTarget 1.9 lbs
GlassTarget 2.7 lbsTarget 2.1 lbs
PolypropyleneTarget 1.8 lbsTarget 1.3 lbs
Minimum Application Temperature:+25°F -4° C

Service Temperature Range: -40° F to +175° F, subject to facestock limitations

Face:
Tested with 2 mil clear polypropylene facestock at room temperature on standard lab panels.

FDA Compliance:
FDA compliance: Fasson® S692N-ER adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.
Typical Shear:
Coat Weight:







Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

Print this Page



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511