Print this Page
Fasson® 2 Mil Metallized BOPP TC/S730/2 Mil Polyester
Spec#
75378 - Restricted to Renown Tag & Label
Facestock:
Fasson® 2 Mil Metallized BOPP TC is a topcoated, biaxially oriented polypropylene which provides mirror-like reflectivity. This product can be diecut and stripped at high speeds on standard web-fed presses with either flatbed or rotary dies. For best performance, it is recommended that dies be tooled specifically for this construction. This product offers excellent dispensing characteristics.
Printable by web screen, UV letterpress, and flexographic. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.
Basis Weight:
n/a
Caliper:
0.0020 inches ± 10%
Tensile:
MD 30,450 psi
CD 24,650 psi
Tear:
n/a
Stiffness:
n/a
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.
Type:
Solvent Acrylic
Minimum Application Temperature:
+45° F
Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data:
2 Mil Clear Polyester at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
2.1 lbs
4.2 lbs
Aluminum
Loop Tack:
Peel Adhesion:
N/A
5.4 lbs
Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:
N/A
3.9 lbs
Polypropylene
Loop Tack:
Peel Adhesion:
N/A
1.7 lbs
HDPE
Loop Tack:
Peel Adhesion:
N/A
0.7 lbs
Liner:
Fasson® 2 Mil Clear Printable Polyester is a liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
n/a
Caliper:
0.00197 ± 10%
Tensile:
MD 22,757 psi
CD 28,446 psi
Tear:
n/a
Total Construction Caliper
(approximate):
0.0048 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511