DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil White Polyester TC/R143NC/1.5M PET
Spec#: 75367 Restricted to Seagate - OBSOLETE 8/2018
FacestockFacestock physical properties
2 Mil White Polyester is a homogeneously pigmented white facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. The topcoat is designed to provide excellent printability with most UV and water based Flexo printing, along with compatibility to most TT ribbons
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0020
inches
50.80
micron
Tensile:
ASTM D882
MD
21,300
PSI
1,497
kg/cm2
CD
28,400
PSI
1,997
kg/cm2
AdhesiveAdhesive physical properties
R143 is a specially formulated acrylic removable adhesive with versatile performance properties. This adhesive complies with the European Directive 2002/95/EC of January 27, 2003, for the restriction of use of certain hazardous substances, and is suitable for use in electronic applications.
Imperial Value
Units
Metric Value
Units
Type:
Solvent acrylic
Caliper:
ASTM D1000
0.0009
inches
22.86
micron
Standard Coat Wt:
23
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
250
F
121
C
Loop Tack Stainless
Steel: PSTC11
20.0
oz/inch
22.0
N/100 mm
LinerLiner physical properties
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0014
inches
35.5600
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
g/sq m
Tensile:
ASTM D882
MD
32,000.0
psi
3,200.0
kg/sq cm
CD
32,000.0
psi
3,200.0
kg/sq cm
Tear:
TAPPI T414
MD
0.0
0.0
grams
CD
0.0
0.0
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
75
.0043

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
his product is suitable for a variety of durable labeling applications such as:
Printing and Converting
The top coat is designed for printing by most solvent, UV cured, and water-based flexographic inks, UV cured letterpress, and rotary screen inks. Specially formulated inks are normally not necessary, however, testing is recommended prior to final ink selection. Also suitable for thermal transfer printing with select ribbons and printers. Consult product recognition files or Fasson Thermal Transfer Ribbon Guide for specific recommendations. This product can be die cut and stripped at high speeds on most web-fed presses. Sample labels in a variety of shapes have been successfully dispensed and applied with standard labeling systems.


RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Stainless Steel

2. Aluminum

3. Polypropylene

4. HDPE

5. LDPE

6. ABS Plastic
14.4

14.4

4.8

3.2

0

9.6
15.8

15.8

5.3

3.5

0

10.6
18.9

17.6

5.8

4.5

0

14
20.8

19.4

6.3

4.9

0

15.3
18.1

8.8

9.4

4.3

0

13
19.9

9.7

10.4

4.8

0

14.3
32.5

13.8

8.5

7.5

1.4

12.8
35.7

15.1

9.3

8.3

1.6

14.1

Environmental Performance: Chemical Resistance test results
The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and evaluated immediately upon removal. Adhesion measured at 180° peel.


Adhesion to Stainless Steel
Visual
Edge
Chemical
oz/in
N/100mm
Appearance
Penetration mm
1. 70% IPA

2. Tide® Detergent

3. Engine Oil (10W30)

4. Water

5. Ammonia - pH 11

6. Toluene

7. Brake Fluid

8. Reference Fuel C

9. Kerosene K1

10. Heptane

11. 409® Cleaner
9.1

3.8

17

6.6

3.7

5.9

14.4

9.1

8.5

10.9

3.8
10

4.2

18.7

7.3

4

6.5

15.8

10

9.4

12

4.2
No Change

No Change

No Change

No Change

No Change

No Change

No Change

Edge Lift

No Change

No Change

No Change
0

0

0

0

0

0

0

Lifted

0

0

0



Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511