Fasson® 2.3 Mil White BOPP TC is a heat set, biaxially-oriented, coextruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by UV and water-based flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.

	Basis Weight:	N/A
	Caliper:	0.0023 inches ± 10%
	Tensile:	MD 26,825 psi CD 22,475 psi
	Tear:	N/A
	Stiffness:	N/A

Adhesive:
Fasson® S2501 is a versatile, general purpose permanent adhesive designed for excellent adhesion to corrugated cardboard and superior adhesion to plastics. Excellent initial tack without sacrificing high speed converting. For use with all information printing technologies, including laser. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion Acrylic
	Minimum Application Temperature:	+38°F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels

	Recycled Corrugated Loop Tack: Peel Adhesion:	0.8 - 1.1 lbs 0.6 - 0.8 lbs
	Rigid HDPE Loop Tack: Peel Adhesion:	1.6 - 2.4 lbs 1.1 - 1.6 lbs
	Treated LDPE Loop Tack: Peel Adhesion:	1.1 - 1.6 lbs 1.2 - 1.6 lbs
	PVC Film Loop Tack: Peel Adhesion:	2.1 lbs 2.5 - 2.7 lbs
	Glass Loop Tack: Peel Adhesion:	3.1 - 3.3 lbs 1.9 lbs

Liner:
Fasson® 40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.

	Basis Weight:	40# per ream +/- 10% (24"x36" 500 sheets)
	Caliper:	0.00240 inches +/- 10%
	Tensile:	MD 34# per inch width CD 14# per inch width
	Tear:	MD 36 grams CD 46 grams

Adhesive:
Fasson® R195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build-up. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. Fasson® R195 is ideal for applications requiring clean removability over long periods of time. It is suitable for use on a wide range of substrates including glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter, although caution should be exercised with stiff facestocks. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.

	Type:	Emulsion Acrylic
	Minimum Application Temperature:	+40° F
	Service Temperature Range:	-65° F to +180° F

Typical Performance Data: , Tested with 60# C1S Paper at room temperature on standard lab panels.

	Glass Loop Tack: Peel Adhesion:	0.9 lbs avg. 1.1 lbs avg.
	Recycled Corrugated Loop Tack: Peel Adhesion:	0.4 lbs avg. 0.5 lbs avg.
	HDPE Loop Tack: Peel Adhesion:	0.7 lbs avg. 1.0 lbs avg.
	Loop Tack: Peel Adhesion:
	Loop Tack: Peel Adhesion:

Liner:
Fasson® 40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.

	Basis Weight:	40# per ream +/- 10% (24"x36" 500 sheets)
	Caliper:	0.00240 inches +/- 10%
	Tensile:	MD 34# per inch width CD 14# per inch width
	Tear:	MD 36 grams CD 46 grams

Total Construction Caliper (approximate): 0.00870 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

label.averydennison.com

Label and Packaging Materials-North America 8080 Norton Parkway Mentor, OH 44060 800-944-8511