DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil Matte Tan TC Polyimide/S3272/50#SCK
Spec#: 75504 - Obsolete
FacestockFacestock physical properties
2 mil Matte Tan Polyimide is a durable film facestock featuring excellent tear strength, heat resistance, dimensional stability and chemical resistance. The smooth topcoated surface has excellent print anchorage for wax/resin ribbons where pure resin ribbons will not work. Specifically designed for thermal transfer, dot matrix, laser and flexo printing. Excellent scuff, scratch, UV and solvent resistance.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0027
inches
68.58
microns
Tensile:
ASTM D882
MD
33,000
PSI
2,320
kg/sq. cm
CD
33,000
PSI
2,320
kg/sq. cm
AdhesiveAdhesive physical properties
S3272 high performance acrylic based pressure sensitive adhesive featuring high ultimate peel and excellent PCB processing chemical resistance.
Imperial Value
Units
Metric Value
Units
Type:
Acrylic
Caliper:
ASTM D1000
0.0018
inches
45.72
microns
Standard Coat Wt:
54
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
500
F
260
C
Loop Tack Stainless
Steel: PSTC11
25.6
oz/inch
28.2
N/100 mm
LinerLiner physical properties
50# SCK is a bleached, super calendered paper stock with very good die-cutting and matrix stripping properties. Used for standard roll-to-roll applications. Not recommended for sheeting.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
50.3
lb/ream
80.5
g/sq m
Tensile:
ASTM D882
MD
37.0
lb/inch
162.8
N/25 mm
CD
20.0
lb/inch
88.0
N/25 mm
Tear:
TAPPI T414
MD
1.6
ounces
45.4
grams
CD
1.9
ounces
54.0
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
60
0.0077 inches (7.7 mils: 195.6 microns)

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Service Temperatures:
Short Term (90 seconds): 500F (260C); no visible effect

2 Hour Exposure: 338F (170C); no visible effect

Long Term (1000 hours): 212F (100C); no visible effect

Typical Adhesive Performace (off stainless steel lab panels at room temperature)
180 Degree Peel Adhesion
20 minute dwell: 2.1 lbs (39 N/100 mm)
72 hour dwell: 2.7 lbs (47.5 N/100 mm)
Loop Tack: 1.6 lbs (28 N/100 mm)

Applications and Uses
This product is ideal for labeling printed circuit boards as well as for automotive, aerospace, medical and manufacturing applications where high temperature and solvent resistance are critical. It is able to withstand surface mount circuit board processes on either the top or bottom side of the board. Can also be used on the top side of the board in mixed processes and recommended for the bottom side when directly exposed to the wave solder environment. This product is a UL recognized component. See file #MH17205 for specific details.

Printing and Converting
For thermal transfer, dot matrix, laser and flexo printing. Suitable for auto print/apply. When used with appropriate ribbon will withstand temperature spikes up to 1000°F (538°C).

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition: UL
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. FR-4 PWB
14
-10
500
260
I
Recognized Ribbons: Ricoh "B110A", Sony "TRX55"





409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511