Print this Page
FassonŽ Global Co-ExTM White TC/S692N/PET30
Spec# 77382
Facestock:
FassonŽ Global Co-Ex™ White TC is a flexible, co-extruded white polyolefin film with a print-receptive topcoating. This film has a machine-direction orientation ("MDO") which offers exceptional dimensional stability, and allows cross-directional conformability. It is ideal for use in a wide range of prime label applications.

Avery Dennison's TC-2000 topcoat is suitable for printing by UV inkjet, UV letterpress and Flexographic UV, and Water-based inks.  Not recommended for thermal transfer printing.  This topcoated facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.  Use caution when applying inks out to the edge of the label, particularly UV cured inks and varnishes.  High shrinkage coatings can cause labels to lift off the liner and/or substrate.



Basis Weight:



Caliper:
0.00250 inches +/- 10%


Tensile:
MD 24,000 psi
CD 3,000 psi


Tear:



Stiffness:

Adhesive:
FassonŽ S692N is a clear, permanent acrylic adhesive featuring a desired balance of good cohesive strength and adhesion to low surface energy substrates. It features good wet-out, UV and water resistance, and short term repositionability.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F
Typical Performance Data: Test method uses Global Co-Ex™ facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.4 - 2.0 lbs
1.1 - 1.7 lbs

PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.2 - 2.8 lbs

Glass
Loop Tack:
Peel Adhesion:

2.8 - 3.4 lbs
1.6 - 2.2 lbs










Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:



Caliper:
0.001160 inches +/- 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:

Total Construction Caliper (approximate): 0.00446 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511