Print this Page
Fasson® Direct Thermal-Eco FSC®/AT2550/1.7M SCK
Spec# C1750
Facestock:
Fasson® Direct Thermal-Eco FSC® is a thin, lightweight economy direct thermal printable facestock which provides good barcode printing within a variety of common DT grocery and logistics applications.

The FSC® certification ensures that products come from well managed forests that provide environmental, social and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
32#per ream +/- 10%
(500sheets 25"X38")


Caliper:
0.00205 inches +/- 10%


Tensile:
MD 20# per inch width
CD 10# per inch width


Tear:
MD 22 grams per sheet
CD 25 grams per sheet


Stiffness:
MD 22 mg
CD 13 mg
Adhesive:
Fasson® AT2550 is an all-temperature adhesive designed to provide good room temperature performance, excellent cold temperature performance, and cleaner converting, without sacrificing good diecutting and stripping properties. Because of its cold temperature properties and good adhesion to corrugated cardboard, AT2550 is an ideal adhesive for warehouse applications. AT2550 is also repulpable; this means it is fully recyclable and enables full recyclability of the end packaging.

Fasson® AT2550 adhesive meets the requirements of FDA CFR 175.105 for indirect food contact.  Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-20° F (-29° C)


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Tested with 54# Semi-Gloss facesheet at room temperature on standard lab panels.


Stainless steel
Loop Tack:
Peel Adhesion:

1.9 - 2.7 lbs
2.9 - 3.7 lbs

HDPE (NT)
Loop Tack:
Peel Adhesion:

1.3 - 2.1 lbs
0.6 - 1.4 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

1.5 - 2.3 lbs
0.8 - 1.6 lbs

Recycled corrugated
Loop Tack:
Peel Adhesion:

0.7 - 1.5 lbs
1.0 - 1.8 lbs

Glass
Loop Tack:
Peel Adhesion:

2.0 - 2.8 lbs
1.9 - 2.7 lbs
Liner:
Fasson® 1.7M Paper SCK is a semi-bleached, super-calendered kraft paper featuring high internal strength, toughness and tear resistance. Excellent for diecutting and stripping. Used primarily for roll to-roll applications.



Basis Weight:
32# per ream ± 10%
(500 sheets 24"x 36")


Caliper:
0.0017 inches ± 10%


Tensile:
MD 33# per inch width
CD 13.5# per inch width


Tear:
MD 30.5 grams
CD 37.0 grams
Total Construction Caliper (approximate): 0.00455 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511