DURABLE PORTFOLIO
Product Data Sheet
Fasson® 3 Mil Synthetic Paper/S8001/1.2M Polyester
Spec#: 79160 - Durable
FacestockFacestock physical properties
3 Mil Matte White Synthetic Paper is a matte finished opaque white polypropylene synthetic material with the look and feel of paper and the moisture-resistance of a film. Suitable for flexographic, letterpress, screen, and thermal transfer printing.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0030
inches
76.20
micron
Tensile:
ASTM D882
MD
15,000
psi
1,055
kg/sq cm
CD
21,000
psi
1,476
kg/sq cm
AdhesiveAdhesive physical properties
S8001 is a high performance, clear permanent emulsion acrylic pressure sensitive adhesive with balanced adhesion to a wide variety of substrates, including low surface energy plastics, engineering grade plastics, bare, coated, or painted metals, including powder coat and enamel paints. It features medium tack and excellent chemical and UV resistance for outdoor industrial applications.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0010
inches
25.40
microns
Standard Coat Wt:
27
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
32.0
oz/inch
35.2
N/100 mm
LinerLiner physical properties
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0012
inches
30.4800
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
g/sq m
Tensile:
ASTM D882
MD
22,000.0
psi
0.0
kg/sq cm
CD
22,000.0
psi
0.0
kg/sq cm
Tear:
TAPPI T414
MD
0.0
0.0
CD
0.0
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
300 inches/min.
50
N/A

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
Printing and Converting
Can be thermal transfer printed with wax, wax/resin combination, and resin based ribbons on standard thermal transfer printing equipment. The smooth matte surface accepts most flexographic, letterpress, and screen inks. The following press inks are UL Recongized in all colors for indoor use without the need for overlamination. Water-based flexogrphic inks: Environmental Inks & Coatings' "DR III FR"; Flint Ink's "HydroFilm ACRE"; and Water Ink Technologies' "Versifilm Plus ULF". UV Flexographic inks: Environmental Inks & Coatings' "UltraFlex III SFR"; Flint Ink's "Flexocure Sigma"; and Water Ink Technologies' "PharmaFlex UV". Also recognized in all colors for indoor use with Jetrion 4000 Series UV ink jet inks. Other ink systems may also be suitable for use with this material. Testing is recommended prior to selecting any thermal transfer ribbon or press ink for production. Can be die cut and converted at high speeds on most roll fed rotary printing equipment. Labels in a variety of shapes and sizes have been successfully dispensed on standard pressure sensitive label dispensers.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Aluminum

2. ABS Plastic

3. Polypropylene

4. HDPE

5. LDPE

6. Stainless Steel
33.8

42.3

11.0

25.5

8

35.2
37.2

46.5

12.1

28.1

8.8

38.7
58

68.9

38.4

32

56

60.4
63.9

75.8

42.1

35.2

61.6

66.5
66.9

54.7

33.9

31.1

6.8

42.9
73.6

60.1

37.3

34.2

7.5

47.2
98.4

71.8

27.7

36.2

16.5

50.6
108.3

79.0

30.5

39.8

18.2

55.7

Environmental Performance: Chemical Resistance test results
The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and evaluated immediately upon removal. Adhesion measured at 180° peel.


Adhesion to Stainless Steel
Visual
Edge
Chemical
oz/in
N/100mm
Appearance
Penetration mm
1. 70% IPA

2. Tide® Detergent

3. Engine Oil (10W30)

4. Water

5. Ammonia - pH 11

6. 409® Cleaner

7. Toluene

8. Brake Fluid

9. Reference Fuel C

10. K1 Kerosene

11. Heptane
46.2

40.1

51.2

19

44.8

49.2

21.7

46.4

39.4

45.7

39.6
50.8

44.1

56.4

20.9

49.3

54.1

23.9

51

43.3

50.2

43.5
No change

No change

No change

No change

No change

No change

No change

No change

No change

No change

No change
0

0

0

0

0

0

0

0

0

0

0



Compliance Recognition: UL
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Acrylic Paint

    2. Acrylic PCP*

    3. ABS Plastic

    4. Alkyd Enamel Paint

    5. Aluminum

    6. Epoxy Paint

    7. Epoxy PCP*

    8. Galvanized Steel

    9. Glass

    10. Melamine

    11. Nylon (polyamide)

    12. Phenolic

    13. Polybutylene Terephthalate PBT

    14. Polycarbonate

    15. Polyester Paint

    16. Polyester PCP*

    17. Polyethylene

    18. PBT Plastic

    19. Polyphenylene Oxide

    20. Polypropylene

    21. Polystyrene

    22. Polyurethane Paint

    23. Poly (Urethane) PCP*

    24. PVC (Rigid)

    25. PVF (Tedlar)

    26. Porcelain

    27. Unsat Thermoset Polyester

    28. Stainless Steel

    29. Acrylic Plastic

    30. EVA
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

140

140
80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

60

60
I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I
Recognized Ribbons: Armor "AXR7+", DNP "R-510", Iimak "SP-330", ITW "B324", Ricoh "B110C"





409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511