Print this Page
Fasson® 2.4 Mil White BOPP ITC/S7000ER/1.2 Mil Polyester
Spec# B7752
Facestock:
Fasson® 2.4 Mil White BOPP ITC (Indigo Top Coat) is a cavitated, biaxially-oriented, coextruded polypropylene film with good opacity and a bright white pearlescent background. The surface has been optimized for printing pressure-sensitive labels on HP Indigo® ws4000, ws4050, ws4500, and ws6000 digital color presses. This Indigo Topcoated (ITC) film has a one-year shelf life.



Basis Weight:



Caliper:
0.00236 inches ± 10%


Tensile:
MD 30,000 psi
CD 58,000 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® S7000ER is a clear, general purpose permanent acrylic adhesive. It exhibits a balance of release properties to enable high speed converting and dispensing on increasingly-thinner substrates. Adhesion performance is designed for low surface energy substrates, enabling lasting performance on rigid and squeezable containers. It has been specifically designed to exhibit excellent wet-out characteristics and water-whitening resistance and good short-term repositionability.

Fasson® S7000ER utilizes AD CleanFlake™ Technology to enable recycling for PET and HDPE plastic bottles and containers. It has been recognized by the Association of Plastic Recyclers.

Below is a link to the APR Letter Recognizing this construction with PET & HDPE recyling:
https://plasticsrecycling.org/images/Critical-Guidance-Letters/APR-CGR-PET-HDPE-label-ps-adhesive-avery-2022.pdf

FDA compliance: Fasson® S7000ER adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25°F (-4°C)


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations
Typical Performance Data: Tested with 2M Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.3-1.7 lbs
0.8-1.2 lbs

PET
Loop Tack:
Peel Adhesion:

2.9-3.2 lbs
1.2-1.5 lbs

Glass
Loop Tack:
Peel Adhesion:

2.0-2.3 lbs
1.1-1.4 lbs

PP
Loop Tack:
Peel Adhesion:

1.3-1.8 lbs
1.1-1.4 lbs





Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00432 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511