Print this Page

þ - Mandatory fields
TS8000 is an extremely aggressive, permanent rubber-based adhesive specifically designed for use on rough and difficult-to-label surfaces, such as tires. Provided with a pattern gum at the edges to avoid adhesive bleed. Due to the heavy adhesive coatweight, TS8000 does not allow for high press speeds. Diecutting and press/inspection rewind tension should be kept under careful control to avoid adhesive bleed.
Adhesive # TS-8000-DR

Imperial Value
Units
Formula Factor
Metric Value
Units
Type:
TS-8000
Caliper:
ASTM D1000
Standard Coat Wt:
65
g/sq m
Minimum Appl Temp:
32
F
(F - 32) * 5/9
0
C
Service Temp Range:
Min
-4
F
(F - 32) * 5/9
-20
C
Max
158
F
(F - 32) * 5/9
70
C
Loop Tack Stainless Steel:
PSTC11
6.4
lbs





Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650 C) &
80% Relative Humidity
    Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm

Adhesion to Stainless Steel
Visual
Edge
    Chemical
oz/in
N/100mm
Appearance
Penetration mm

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

Print this Page



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511