Print this Page
Fasson® Lumberwrap/C2580/40#SCK
Spec# ECR 14-Z760-RESTRICTED
Facestock:
Fasson® 3M White Lumber Wrap is a matte appearance film face with optimized opacity, brightness and designed for use at low temperature. The face is treated for all conventional print methods and is thermal transfer printable.



Basis Weight:
38# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.0030 inches ± 10%


Tensile:
CD 5510 psi
MD 5800 psi


Tear:
CD 600 lbs/inch
MD 540 lbs/inch


Stiffness:
CD 25mg
MD 25mg
Adhesive:
Fasson® C2580 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, especially low surface energy plastics. This adhesive is designed to perform for low temperature applications. Fasson® C2580 features excellent high-speed, wide-web converting characteristics.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+10° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data:


Stainless Steel
Loop Tack:
Peel Adhesion:

4.86 lbs
4.98 lbs

HDPE
Loop Tack:
Peel Adhesion:

2.97 lbs
1.97 lbs

LDPE
Loop Tack:
Peel Adhesion:

Not Tested
2.46 lbs

PP
Loop Tack:
Peel Adhesion:

4.37 lbs
3.49 lbs

PP Tarp
Loop Tack:
Peel Adhesion:

1.36 lbs
1.85 lbs
Liner:
40#SCK is a bleached, super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
40.70# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0025 inches ± 10%


Tensile:
MD 34# per inch width
CD 22# per inch width


Tear:
MD 32 grams
CD 34 grams
Total Construction Caliper (approximate): 0.0063 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511