Print this Page
Fasson® Global Co-ExTM White NTC/S692N/PET30
Spec# 77179 - Restricted to WS Packaging Group
Facestock:
Fasson® Global Co-Ex™ White NTC is a corona-treated, flexible, opaque white machine-direction oriented polyolefin film providing exceptional dimensional stability. It features a matte appearance and provides moderate conformability for use in a wide range of applications including prime label. The engineered print skin on this film is suitable for water-based flexo, UV flexo, UV rotary screen, UV letterpress, and solvent-based print methods. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrink coatings can cause labels to lift off the liner or substrate. According to the manufacturer, this product has FDA compliance with Title 21 CFR Part 177.1520. Compliance with this regulation allows for direct contact of the face with dry, aqueous and fatty foods.



Basis Weight:
n/a


Caliper:
0.0025 inches ± 10%


Tensile:
MD 169,811 psi
CD 66,628 psi


Tear:



Stiffness:

Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.2 - 1.8 lbs
1.1 - 1.7 lbs

PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.6 - 3.2 lbs

Glass
Loop Tack:
Peel Adhesion:

2.6 - 3.2 lbs
1.6 - 2.2 lbs










Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications. According to the manufacturer, this product has FDA compliance with Title 21 CFR Part 177.163. Compliance with this regulation allows the direct contact of the film with all food types.



Basis Weight:
N/A


Caliper:
0.00118 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00448 inches ± 10%

"This specification is recognized by the Association of Plastic Recyclers (APR)  for the recycling of HDPE bottles."


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511