Print this Page
Fasson® 55# Semi-Gloss UV Inkjet/C2510/40#CK
Spec# ECR 19-XJ113 - RESTRICTED
Facestock:
Fasson® 55# Semi-Gloss UV Inkjet (UVIJ) is a lightweight, supercalendered, coated facestock for labels produced digitally. The surface has been optimized for printing pressure sensitive labels on UVIJ platforms such as Domino N610i, Durst Tau® 330, EFI Jetrion® 4900, 4950LX and the Mark Andy Digital Series. It has optimized opacity, brightness, smoothness, and gloss. Additional product constructions utilizing the same facestock are available. NOTE: In-house testing is always recommended prior to final ink selection. Qualification is subjective evaluation and customer perception may differ. As label designs vary, we encourage end application testing of all materials

Fasson® and all other Avery brands, product names, and codes are trademarks of Avery Dennison Corporation.



Basis Weight:
55# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0030 inches ± 10%


Tensile:
MD 25# per inch width
CD 17# per inch width


Tear:
MD 49 grams per sheet
CD 49 grams per sheet


Stiffness:
MD 150 mg
CD 105 mg
Adhesive:
Fasson® C2510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass, and corrugated cardboard. C2510 was engineered specifically for cold, damp environments typical of dairy environments. C2510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive could occur.



Type:
Hot melt rubber


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 50# Dairy Label at room temperature on standard lab panels


HDPE
Loop Tack:
Peel Adhesion:

3.2 lbs
1.8 lbs

LDPE
Loop Tack:
Peel Adhesion:

2.7 lbs
1.6 lbs

Corrugated
Loop Tack:
Peel Adhesion:

1.5 lbs
1.6 lbs










Liner:
40#CK liner is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
37.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0024 inches ± 10%


Tensile:
MD 35# per inch width
CD 16# per inch width


Tear:
MD 30 grams
CD 34 grams
Total Construction Caliper (approximate): 0.00620 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511