Print this Page
Fasson® TransCode® White/S4900/78#MF
Spec# 73642
Facestock:
Fasson® TransCode® is a white polyolefin thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. Suitable for indoor or outdoor use. This product can be diecut and stripped at high speeds on standard web-fed presses.



Basis Weight:
N/A


Caliper:
0.0040 inches ± 10%


Tensile:
MD 20,000 psi
CD 31,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S4900 is a clear, general purpose permanent acrylic adhesive with good initial tack and ultimate adhesion to a wide variety of substrates. Designed exclusively for industrial labeling applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to + 200° F subject to facestock limitations
Typical Performance Data:


Stainless Steel
Loop Tack:
Peel Adhesion:

2.8 lbs
3.2

Glass
Loop Tack:
Peel Adhesion:

N/A
3.9

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.5

PVC
Loop Tack:
Peel Adhesion:

N/A
3.9

HDPE
Loop Tack:
Peel Adhesion:

N/A
2.0
Liner:
78#MF is a machine finished bleached kraft paper liner. Used primarily for roll-to-sheet applications, including laser. Features good back printability.



Basis Weight:
79# per ream ±10%
(24" X 36" 500 sheets)


Caliper:
0.0049 inches ± 10%


Tensile:
MD 45# per inch width
CD 25# per inch width


Tear:
MD 70 grams
CD 82 grams
Total Construction Caliper (approximate): 0.0091 inches ± 10%

Printing/Converting
This corona treated film offers excellent thermal transfer receptivity with a variety of machine and ribbon combinations. Can be diecut and stripped at high speeds on standard web-fed presses.

Applications and Uses
This product is supplied with an adhesive suitable for moderately textured or overdyed cotton fabric apparel. However, since not all fabrics and dyes react the same, we strongly recommend testing and scale-up trials on the actual garments intended to insure proper function.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511