Print this Page
Fasson® Crystal FasClear® TC/S1000/40#BG
Spec#
TBD - RESTRICTED TO PLATINUM PRESS
Facestock:
Fasson® Crystal FasClear® is a topcoated, flexible crystal clear polyolefin film with exceptional dimensional stability. Recommended for printing with web UV screen, UV letterpress, UV Flexographic and water based flexographic inks. Not recommended for solvent based ink systems. In-house testing is always recommended prior to final ink selection. Use caution when applying inks to the edge of the label, particularly UV inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate.
Basis Weight:
N/A
Caliper:
0.0025 inches ± 10%
Tensile:
MD 21,000 psi
CD 3,200 psi
Tear:
N/A
Stiffness:
N/A
Adhesive:
Fasson® S1000 is a clear permanent adhesive specifically designed to exhibit excellent wet-out characteristics on clear films. Frequently used in the prime label market where squeezability and clear labeling are critical. Meets the requirements of FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Emulsion acrylic
Minimum Application Temperature:
+10° F
Service Temperature Range:
-40° F to +200° F, subject to facestock limitations
Typical Performance Data:
2 Mil Clear Polyester facestock at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
3.2 - 3.6 lbs
1.9 - 2.3 lbs
HDPE
Loop Tack:
Peel Adhesion:
1.0 - 1.5 lbs
0.8 - 1.3 lbs
Glass
Loop Tack:
Peel Adhesion:
2.8 - 3.3 lbs
2.0 - 2.3 lbs
Liner:
Fasson® 40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low- to medium-speed dispensing applications. Not recommended for sheeted applications. Features good back printability.
Basis Weight:
37.20# per ream
(500 sheets 24" x 36")
Caliper:
0.00211 inches ± 10%
Tensile:
MD 44 pounds per inch
CD 19 pounds per inch
Tear:
MD 41 grams
CD 46 grams
Total Construction Caliper
(approximate):
0.00541 inches +/- 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511