Print this Page
Fasson® 2 Mil Brushed Metallized Polyester TC/S814B/50#MF ABC
Spec# 78300 - Restricted
Facestock:
Fasson® 2 Mil Brushed Chrome Polyester TC is a film with a rich brushed metallic appearance featuring excellent tear strength, heat resistance, dimensional stability, opacity and chemical resistance. Designed for printing with most solvent and some water-based flexographic inks. Suitable for thermal transfer printing applications with select thermal transfer ribbons. Specific testing required.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 26,000 psi
CD 20,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S814 is a permanent adhesive based on high strength acrylic polymers featuring high initial tack and ultimate adhesion to a wide variety of substrates. Excellent solvent and moisture resistance.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

3.7 lbs
7.9 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
8.0 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
8.0 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
5.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
4.3 lbs
Liner:
50#MF is a coated stock that adds to the overall stability of the total construction in roll to sheet application.



Basis Weight:
50# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0034 inches ± 10%


Tensile:
MD 25# per inch width
CD 13# per inch width


Tear:
MD 60 grams per sheet
CD 75 grams per sheet
Total Construction Caliper (approximate): 0.0064 inches ± 10%

NOTE: S814B is a heavy adhesive coat weight of S814.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511