Print this Page
Fasson® Transcode/S730/50#SCK ABC PATTERN GUM
Spec# 78709
Facestock:
Fasson® TransCode® is a white polyolefin thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. Suitable for indoor or outdoor use. This product can be diecut and stripped at high speeds on standard web-fed presses.



Basis Weight:
N/A


Caliper:
0.0040 inches ± 10%


Tensile:
MD 20,000 psi
CD 31,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.





Type:
Solvent Acrylic


Minimum Application Temperature:
+45° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
5.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs
Liner:
50#SCK is a bleached, super-calendered kraft paper stock with very good die cutting and matrix stripping properties. Used primarily for roll-to-roll and fanfold label applications. Not recommended for sheeted applications. Test suitability for use in fanfold label applications due to ABC ("anti-block coating") applied to backside of the liner to control adhesive and label transfer in finished, wound rolls. Backside printable with many water-based flexo inks.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0071 inches ± 10%

NOTE: THIS CONSTRUCTION CONTAINS A PATTERN GUM ADHESIVE

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511