Print this Page
Fasson® TransCode® White II/S717P/50#SCK
Spec# 79106
Facestock:
Fasson® TransCode® White II is a white polyolefin thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. Printable by screen, UV letterpress, UV solvent, and water-based flexographic inks, thermal transfer resin-based or wax/resin combination ribbons. In-house testing is always recommended prior to final ink or ribbon selection. This facestock is opaque to most thermal transfer printer sensors. However, older model printers might not sense it, and it might be necessary to use registration holes between labels or backprint the liner with registration marks. Testing in the printer is highly recommended prior to entering production commitments. This product can be diecut and stripped at high speeds on standard web-fed presses using tooling specifically designed for this construction. This product is not recommended for automatic labeling applications. Suitable for indoor or outdoor use.



Basis Weight:
n/a


Caliper:
0.0025 inches ± 10%


Tensile:
MD 17,500 psi
CD 2,400 psi


Tear:
MD 9 grams
CD 107 grams


Stiffness:
MD 20 mg
Adhesive:
Fasson® S717P is a permanent acrylic adhesive offering high initial tack, minimal cold flow, and excellent mandrel holding power. It performs well on a variety of substrates, including plastics and glass. Its excellent holding power prevents edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S717P provides excellent diecutting and stripping characteristics, as well as automatic labeling features. It is suitable for use in applications where sterilization methods are used, and is ideal for critical pharmaceutical applications requiring extended component change notification.

FDA Compliance: S717P adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-65° F to +250° F
Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

3.7 lbs
2.0 lbs - tear

HDPE
Loop Tack:
Peel Adhesion:

2.5 lbs
1.8 lbs - tear

Recycled Corrugated
Loop Tack:
Peel Adhesion:

2.5 lbs - pulled fibers
1.4 lbs - pulled fibers

Glass
Loop Tack:
Peel Adhesion:

4.3 lbs
2.1 lbs - tear

Polypropylene
Loop Tack:
Peel Adhesion:

1.8 lbs
1.7 lbs - tear
Liner:
Fasson® 50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0065 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511