Print this Page
FassonŽ 70# Houndstooth 30%PCW Wet-Strength /Z2010B/1.2M Polyester
Spec# B8487
Facestock:
FassonŽ 70# Houndstooth 30% PCW shows a subtle textured pattern reminiscent of a cloth with abstract shapes on a warm white material. It contains 30% post-consumer waste. A perfect backdrop for luxurious wine, spirits and other high-end labels who are looking for sustainable options. The facesheet has wet strength treatment to increase performance in wet applications.

Due to its high stiffness, it is not recommended for labeling on small diameters, neck labels in particular. It is important to apply adequate pressure during the labeling process to ensure a good adhesion performance on the substrate.



Basis Weight:
69.8# per ream +/- 10%
(500 sheets 25"x38")


Caliper:
0.00590 inches +/- 10%


Tensile:
MD 33.60# per inch width
CD 26.10# per inch width


Tear:
MD 48 grams per sheet
CD 74 grams per sheet


Stiffness:
MD 271 mg
CD 145 mg
Adhesive:
FassonŽ Z2010 is a versatile, general purpose permanent adhesive designed for excellent adhesion to glass, corrugated cardboard and plastics. Developed with excellent initial tack, permanent adhesion and cold/web application performance. FassonŽ Z2010 performs without sacrificing high-speed converting or good diecutting and matrix stripping properties. FassonŽ Z2010 adhesive is APEO-Free.

For premium packaging, FassonŽ Z2010 offers confidence in cold/wet applications and is ideal for brands looking for ice bucket and cold box performance.

FDA compliance: FassonŽ Z2010 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+0° F


Service Temperature Range:
-30° F to +300° F (Subject to Facesheet)
Typical Performance Data: Tested with 60# Estate #8 paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

3.5 lbs
2.4 lbs Tear

HDPE
Loop Tack:
Peel Adhesion:

2.5 lbs
1.5 lbs Tear

PET
Loop Tack:
Peel Adhesion:

5.0 lbs
1.5 lbs Tear

Glass
Loop Tack:
Peel Adhesion:

4.5 lbs
2.5 lbs Tear





Liner:
A 1.2 mil durable polyester liner suitable for high-speed, roll-to-roll diecutting, stripping, and label dispensing. Its ultra-smooth surface enhances adhesive wet-out.



Basis Weight:



Caliper:
0.00118 inches +/- 10%


Tensile:
MD 27,000 psi
CD 27,000 psi


Tear:
n/a
Total Construction Caliper (approximate): 0.00788 inches +/-10%

NOTE: The Z2010B is a heavy coat weight adhesive of Z2010.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511