Print this Page
Fasson® 60# Semi-Gloss EliteTM FSC®/S246/1.2M PET
Spec# 54030
Facestock:
Fasson® 60# Semi-Gloss Elite™ FSC® is a bright, blue-white, 58#C1S, super calendered paper. It is designed to bridge the gap between low- and high-end process printing, up to 175 line screen. This sheet prints well with water-based flexo, UV flexo, and UV letterpress inks. It has improved smoothness, while maintaining strength for good converting and dispensing.

The FSC® certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
58.0# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0030 inches ± 10%


Tensile:
MD 34.6# per inch width
CD 16# per inch width


Tear:
MD 43 grams per sheet
CD 56 grams per sheet


Stiffness:
MD 128 mg
CD 71 mg
Adhesive:
Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot melt rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 60# C1S paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

6.2 lbs
3.0 lbs-tear

HDPE
Loop Tack:
Peel Adhesion:

4.3 lbs
2.2 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

4.5 lbs
3.0 lbs-tear

Glass
Loop Tack:
Peel Adhesion:

6.0 lbs
2.6 lbs-tear





Liner:
A 1.2 mil durable polyester liner suitable for high-speed, roll-to-roll diecutting, stripping, and label dispensing. Its ultra-smooth surface enhances adhesive wet-out.



Basis Weight:



Caliper:
0.00118 inches ± 5%


Tensile:
MD 27,000 psii
CD 27,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.0051 inches ± 10%

The combination of this adhesive and liner may result in zippy and inconsistent release. The converter assumes responsibility for any converting and/or end use difficulties associated with this issue.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511