DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil White Hi-Temperature Topcoated Polyimide/S3272/55#BG
Spec#: 77502 - Durable
Rev 6.2.23 UL
FacestockFacestock physical properties
2 Mil Semi-Gloss White Hi Temperature Topcoated Polyimide is a durable film facestock featuring excellent tear strength, heat resistance, dimensional stability, and chemical resistance. The high opacity, matte white topcoat was specifically designed for thermal transfer printing. It offers excellent scuff, scratch, UV, and temperature resistance. Can withstand the higher temperatures associated with lead-free solder processes.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0026
inches
66.04
microns
Tensile:
ASTM D882
MD
33,000
PSI
2,320
kg/sq. cm.
CD
33,000
PSI
2,320
kg/sq. cm.
AdhesiveAdhesive physical properties
S3272 high performance acrylic based pressure sensitive adhesive featuring high ultimate peel and excellent PCB processing chemical resistance.
Imperial Value
Units
Metric Value
Units
Type:
Acrylic
Caliper:
ASTM D1000
0.0018
inches
45.72
microns
Standard Coat Wt:
54
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
500
F
260
C
Loop Tack Stainless
Steel: PSTC11
25.6
oz/inch
28.2
N/100 mm
LinerLiner physical properties
55# BG A bleached white glassine liner with excellent smoothness and roll label converting properties. Not recommended for sheeting applications
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0031
inches
78.7400
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
55.0
lb/ream
88.0
g/sq m
Tensile:
ASTM D882
MD
54.0
lb/inch
237.6
N/25 mm
CD
23.0
lb/inch
101.2
n?25 mm
Tear:
TAPPI T414
MD
1.9
ounces
54.0
grams
CD
2.3
ounces
65.3
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
50
0.0075 inches (7.5 mils; 190.5 microns)

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits

Service Temperatures:
Short Term (90 seconds): 572F (300C); moderate discloloration*
2 Hour Exposure: 374F (190C); slight discoloration*
Long Term (1000 hours): 248F (120C); slight discororation*
*Label remains functional even after moderate discoloration

Typical Adhesive Performace (off stainless steel lab panels at room temperature)
180 Degree Peel Adhesion
20 minute dwell: 1.4 lbs (24.6 N/100 mm)
72 hour dwell: 2.2 lbs (38.7 N/100 mm)
Loop Tack: 1.6 lbs (28 N/100 mm)


Applications and Uses
This product is ideal for labeling printed circuit boards as well as for automotive, aerospace, medical and manufacturing applications where high temperature and solvent resistance are critical. It is able to withstand surface mount circuit board processes on either the top or bottom side of the board. Can also be used on the top side of the board in mixed processes and recommended for the bottom side when directly exposed to the wave solder environment.

Printing and Converting
For thermal transfer and flexo printing. Due to thinner material, auto print/apply should be checked carefully. When used with appropriate ribbon will withstand temperature spikes up to 1000°F (538°C).

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix

Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.

Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Stainless Steel
33.6
37
49.6
54.6






Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511