DURABLE PORTFOLIO
Product Data Sheet
Fasson® 3.5 Mil WBIJ Drum/S8029/50#SCK
Spec#: 79820
FacestockFacestock physical properties
3.5 Mil Matte White Synthetic Paper WBIJ is a matte finished opaque white polypropylene synthetic material with the look and feel of paper and the moisture-resistance of a film.  Designed primarily for pigment based inks, this water based inkjet face has the durability required for many demanding drum and industrial applications
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0035
inches
88.90
micron
Tensile:
ASTM D882
MD
7,500
psi
527
kg/sq cm
CD
6,900
psi
485
kg/sq cm
AdhesiveAdhesive physical properties
S8029 is a rubber hybridized acrylic adhesive with extremely high final adhesion on a wide variety of surfaces, including textured and low surface energy substrates. This adhesive has excellent chemical resistance.
Imperial Value
Units
Metric Value
Units
Type:
S8029 Durable
Caliper:
ASTM D1000
0.0010
inches
25.40
micron
Standard Coat Wt:
27
g/sq m
Minimum Appl Temp:
41
F
5
C
Service Temp Range:
Min
-40
F
-40
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
3.5
lb/in
0.0
LinerLiner physical properties
50# SCK is a bleached, super-calendered paper stock with very good diecutting and matrix stripping properties. Used for standard roll-to-roll and fanfolded applications. For best results, fanfolded products must be processed in a controlled environment of 40-50% RH. Not recommended for sheeted applications. Features good back printability.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.0260
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
57.7
lb/ream
92.3
g/sq m
Tensile:
ASTM D882
MD
51.0
lb/in
224.4
N/25 mm
CD
22.7
lb/in
99.8
N/25 mm
Tear:
TAPPI T414
MD
2.0
ounces
57.1
grams
CD
2.7
ounces
76.7
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
45
.0077

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
* Inkjet printable film specially engineered to be receptive to a variety of inkjet printers.
* 3.5 Mil Matte White Inkjet Drum Label is designed for harsh environments. 
* It can incorporate color-on-demand in compliance with GHS standards. 

Applications and Uses
* S8029 products are designed to be briefly repositionable, and then adhesion increases to a very high ultimate peel strength.

Printing and Converting
* The facestock certified for use with EPSON C-3400, C-3500, and C-831 printing platforms for water based inkjet printing

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511