DURABLE PORTFOLIO
Product Data Sheet
7M Clear Polyester NTC/S8020B/1.5 Mil Clear PET PLB
Spec#: 79775 DURABLE
FacestockFacestock physical properties
7 Mil Clear Polyester is a ultra-clear film that is chemically treated to provide enhanced adhesion to inks, coatings and adhesives. Offering high durability and optical clarity with balanced shrink for improved flatness after thernmal processing.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0070
inches
177.80
micron
Tensile:
ASTM D882
MD
35,000
psi
2,461
kg/cm2
CD
35,000
psi
2,461
kg/cm2
AdhesiveAdhesive physical properties
S8020 is a clear, permanent acrylic adhesive designed for overlaminating films. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates. Specifically designed to exhibit excellent wetout characteristics, good yellowing resistance, and excellent clarity.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0007
inches
17.78
micron
Standard Coat Wt:
19
g/sq m
Minimum Appl Temp:
23
F
-5
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
40.0
oz/inch
44.0
N/100 mm
LinerLiner physical properties
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0014
inches
35.5600
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
g/sq m
Tensile:
ASTM D882
MD
32,000.0
psi
3,200.0
kg/sq cm
CD
32,000.0
psi
3,200.0
kg/sq cm
Tear:
TAPPI T414
MD
0.0
0.0
grams
CD
0.0
0.0
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
40
.009 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
This product is suitable for wide variety of durable labeling applications such as:
Printing and Converting
Excellent adhesion to solvent-based inks, coatings and adhesives

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511