Print this Page
Fasson® TransCode® White II/R110/50#SCK
Spec# 74299
Facestock:
Fasson® TransCode® White II is a white polyolefin thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. Printable by screen, UV letterpress, UV solvent, and water-based flexographic inks, thermal transfer resin-based or wax/resin combination ribbons. In-house testing is always recommended prior to final ink or ribbon selection. This facestock is opaque to most thermal transfer printer sensors. However, older model printers might not sense it, and it might be necessary to use registration holes between labels or backprint the liner with registration marks. Testing in the printer is highly recommended prior to entering production commitments. This product can be diecut and stripped at high speeds on standard web-fed presses using tooling specifically designed for this construction. This product is not recommended for automatic labeling applications. Suitable for indoor or outdoor use.



Basis Weight:
n/a


Caliper:
0.0025 inches ± 10%


Tensile:
MD 17,500 psi
CD 2,400 psi


Tear:
MD 9 grams
CD 107 grams


Stiffness:
MD 20 mg
Adhesive:
Fasson® R110 is a general purpose removable adhesive with good initial tack. Designed primarily for shelfmarking applications. Meets the requirements of FDA 21, CFR 175.105. Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

1.1 lbs
0.3 lbs

Aluminum
Loop Tack:
Peel Adhesion:

n/a
1.6 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

n/a
1.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

n/a
0.8 lbs

HDPE
Loop Tack:
Peel Adhesion:

n/a
0.4 lbs
Liner:
Fasson® 50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0065 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511